Category: Home Improvement

Home / Category: Home Improvement

Cleaning and Maintaining Your Newly Reglazed Bathtub

February 14, 2023 | Home Improvement | No Comments

One approach to improving the appearance of your bathtub is to refinish or reglaze it with a polyurethane coating. Treat it like a car’s paint job if you want a restored bathtub to keep its finish. A few extra steps are required to keep the Tile Regrouting NJ finish. If you don’t care for your finish, it won’t last as long, and you risk voiding the guarantee.

Here’s what you should do to keep your recently refinished or reglazed tub in good condition:

  • If the company requests you to cease using the surface for a set time, please do so.
  • Bottles, rags, soap, or sponges should never be placed on the finish. In its stead, use a shower rack.
  • Any dripping faucets should be repaired as soon as possible.
  • To avoid injury, use mild cleaning products rather than aggressive ones. Signaling components such as S-O-S pads are not present. No, it’s a comet. Razors are challenging to come by. NO ABRASIVES! Use a soft sponge and spray cleansers to clean the tub.
  • Suction-cup bath mats should not be utilized. They may retain moisture and cause the finish to pull.
  • Never pick at the surface with your fingers to remove dust. After three to four weeks of constant cleaning and use, all visible dust should be gone. Waxing has advantages as well.

Paintbrushes and other painting tools Never ever clean a glazed surface., even a bathtub, using bathtub reglazing New Jersey apparatus. In the bath, avoid using strong chemicals. It should not be washed or kept with anything that might damage or cut it.

By following these suggestions, you can safeguard your investment in https://wilmingtontubreglazing.com/ a freshly refinished tub or tile and ensure that your warranty remains valid.

Read More
By Claudia Stephens

7 Ways to Check for Water Damage in Your Stucco Home

February 2, 2023 | Home Improvement | No Comments

1. Damp Looking Stucco

Now getting the stucco wet should not be a reason for concern. It will make sense that it is wet once it rains. However, if it is still wet a week after the rainy weather, it indicates that water has penetrated the stucco. There may also be areas of the wall that seem consistently moist. Pay special attention to those since that is where water may be entering.

2. Cracks 

A break in the stucco indicates that there is water in your stucco. However, you should not be alarmed since this does not imply that you have sustained irreversible injury. It is, however, a clue that water has made its way inside, and you must act quickly before the situation worsens.

3. Missing Chunks of Stucco

Examine your stucco to check if any pieces of siding have fallen loose. Water has gotten below and is creating difficulties, as seen by the surface damage.

4. Cracks and Bubbles at the Bottom of the Wall

Look for visible fractures or bubbles at the bottom borders during your inspection. Water, like everything else, must follow gravity and will flow downward. That indicates that most of the damage is likely to occur near the base of the wall.

5. Window Caulking Damage

Do you see any gaps or fractures in your window caulking? This is also an indication that water has entered the stucco. If it has been there for a long time, you will also need to replace the windows. That is why it is critical to do regular stucco inspections.

6. Soft Drywall

You’re heading inside now to do more research. Examine the drywall underneath your windows. Does it have a soft feel to it? Another telltale indicator of water damage. That area of drywall and the stucco on the exterior will need to be replaced in these circumstances.

7. Basement Moisture

Finally, inspect the walls in your basement. If there is water in the stucco, it might cause wetness on the walls. This is one of many reasons this may happen, so rule out other possibilities before fixing the issue.

Read More
By Claudia Stephens

Which Kitchen Countertop Material Should You Use?

January 17, 2023 | Home Improvement | No Comments

While choosing the correct one for your kitchen can have a significant impact on the quality of your cooking and cleaning experiences, it may appear like choosing a countertop material (or the type of wood, for that matter) is all about aesthetics.

The performance of your appliances may even be impacted by certain materials. The functionality of your microwave can suffer, for instance, if it is placed on a countertop that is prone to nicks or scratches from contact with particular chemicals.

We have listed the benefits and drawbacks of the most popular countertop materials. In order to make an informed choice, consider the following.

Material 1: Granite

In the market for countertops, granite is among the most gorgeous and long-lasting materials. This substance, which is made from minerals and repurposed granite slabs, is incredibly strong and can bear intense heat. Moreover, it is uncommon to locate a granite countertop in a kitchen without any number of stains, cracks, chips, or gouges.

The surface should be frequently cleaned because this material will start to dull with time. Immediately wiping up spills and grease stains will help prevent discoloration.

Because granite is so porous, it shouldn’t be used in situations with a lot of humidity. It could also be more susceptible to heat damage and scratches than other countertop materials.

Pros: 

  • It has a beautiful appearance.
  • extreme toughness

Cons:

  • Expensive
  • May stain
  • Heat may harm it.

Materials 2: Quartz

Because it can withstand temperatures of up to 400 degrees Fahrenheit without melting, quartz is a popular material for countertops. The majority of acids and chemicals won’t damage it, making it one of the materials that are least susceptible to stains and scratches.

Quartz is a popular option for high-humidity kitchens, similar to granite, but due to its heat resilience, it can also be utilized in spaces with burners and toasters. Knives and other things won’t scratch it either, but when subjected to extreme heat, it can chip or even break.

Pros:

  • Exceptional scratch resistance
  • excellent heat resistance (up to 400 degrees Fahrenheit)
  • really tough

Cons:

  • Expensive
  • if subjected to too much heat, may chip or break.

Material 3: Soapstone

One of the most aesthetically pleasing countertop materials is soapstone. It is a fantastic option for kitchens with heavy traffic because it is naturally heat-resistant. Furthermore, it has a special mineral makeup, so even with frequent cleaning, food stains and discoloration won’t ever appear.

With regard to a non-porous surface that is challenging to scratch or chip, soapstone is a fantastic option for kitchens with dogs or kids. But some people experience allergic reactions to it, and it is one of the most prone to cracking and splintering surfaces.

Pros:

  • Heat- and food-stain-resistant
  • There are no stains

Cons:

  • Poor value for money
  • for some people, causes allergies

Material 4: Quartzite

It is a common choice for kitchens with burners and ovens since quartzite, another variety of quartz has a very good heat resistance. The degree of hardness is what distinguishes quartz and quartzite most. Although quartzite can be damaged by dents and scratches, quartz is softer than quartzite.

Quartzite is extremely heat, wind, and water resistant as well as stain resistant, like quartz. If not properly sealed, this substance, however, can chip around the edges.

Pros:

  • Exceptionally heat- and water-resistant
  • There are no stains

Cons:

  • Expensive
  • if the seal isn’t done well, can chip

Conclusion

Consider your comfort level with the material, finish, and design of your kitchen, and the level of durability that is most important to you when selecting the ideal kitchen countertop. From an illustration, it’s advisable to select a countertop material that is heat resistant if you intend to purchase a gas stove as this will increase the lifespan of your countertop.

It is usually advisable to buy an extended warranty for peace of mind, regardless of the material you select.

In Hackensack, NJ, for more than 30 years, https://www.hackensackcontractors.com/ has been a well-known custom house builder. For our clients’ homes, our staff takes great pride in designing distinctive spaces. We’ll make sure you’re pleased with the results whether you’re beginning from scratch or just making some tweaks.

Read More
By Claudia Stephens

The Right Method for Removing Ceiling Water Stains

October 26, 2022 | Home Improvement | No Comments

A water stain on the ceiling is something that can occur in both newly constructed homes and older ones. There is a wide range of potential causes, from problems with the roof to leaking pipes between levels. No matter what precipitated the water damage, the end result is a stain on the ceiling, no matter how big or how small, as well as possibly some secondary issues like bubbling and cracking. Even though these blobs of brownish color can make your home appear less appealing than you would like it to, you do not lack solutions for cleaning or concealing the stains.

Is it Possible to Cover a Water Stain with Paint on My Ceiling?

It is possible to paint over a stain so that it is no longer visible. You will, however, need to begin by locating and eliminating the source of the stain before you can be certain that it will not reappear and cause even more extensive harm. Paint is an excellent solution to cover a stain once the problem that caused it has been resolved.

The Best Method to Hide Water Marks on the Ceiling

There are a few critical procedures that must be taken in order to guarantee that you will achieve the revitalized appearance you desire while preventing any further damage.

1. Determine the Root of the Discoloration

It’s possible that the water stain on your ceiling was caused by a damaged roof or another significant issue. The following are some of the most common reasons for ceiling stains that require the assistance of a trained professional:

  • Plumbing leaks. Investigate the possible causes of plumbing leaks so that you will have an idea of where to start when you bring in a professional.
  • Ice dams. You’ve probably heard of the danger posed by ice dams if you live in a region that experiences cold winters. If you have a water stain on your ceiling, you should check your roof to see if this could be the culprit.
  • Clogged gutters. If your gutters are clogged, water may flow where it shouldn’t, which could result in discolored ceilings in the basement or other unfavorable outcomes.

In any of these scenarios, once you have turned off the water supply, it is a smart idea to get in touch with a water damage expert and get the essential cleanup services to avoid more damage from occurring.

2. Treat the stain with bleach or another suitable cleaner.

Water stains are unsightly and can also lead to the growth of mold. Check to see that you are not covering the stain before it has been thoroughly cleansed. Wipe away the stain with a solution made of one part bleach and three parts warm water, or use a cleaner that has already been pre-mixed. The solution can be removed with a damp rag, and the area can be dried off with a towel. It will take a few hours for the ceiling to completely dry out.

3. Spread Primer on the Ceiling

When you paint a wall, you start by priming it first, and you should do the same thing here. Sherwin-Williams has alternatives like as an oil-based ProBlock alkyd primer and a water-based Quick Dry Stain Blocking acrylic primer for circumstances like this one, in which a stain on the ceiling needs to be covered. Even after cleaning and painting, a reaction with the stain can still be noticeable if you use an all-purpose primer inside, as this is presumably what you’re used to doing.

4. Start Putting on the Paint

After the primer has had enough time to cure, it is time to cover the water spots on the ceiling with paint. Because you chose to supply the initial layer with an oil-based primer, you are now free to use any latex paint you like for the primary coat (s). Painting the entire ceiling of a room is the most effective approach to ensure that the color is uniform across the space, despite the fact that doing so may seem like a monumental task. For example, you don’t want a newly painted area to give the impression of unevenness in the same manner that the stain did.

Bring in the Experts

Painting over water stains (once the water damage has been reduced) can be a complex operation that requires a number of stages to accomplish in order to obtain the desired effects. Call Elmer’s Painting experts if you’d prefer to devote your time and effort to something else, as they are very skilled in the field. The appearance of your ceiling can be improved by working with us. We are able to assist you with any additional painting project you may have, whether it be inside or outside the house. You can reach us at (201) 975-6511 or call today for a free estimate system.

Read More
By Claudia Stephens

What Are the Most Appropriate Colors to Use When Painting a Bedroom?

September 28, 2022 | Home Improvement | No Comments

The choice of paint colors for a bedroom is not something that should be made on a whim. There are approximately 33 years of a person’s life that are spent sleeping. Although a single coat of paint is not going to last you through that full-time period, there is a good probability that the next coat of paint you apply will be there for some time. Because you will spend so many hours in your bedroom, the atmosphere of the room will have a significant impact not only on your ability to fall asleep at night but also on how you communicate with your partner, the disposition in which you wake up, and a great deal more.

Instead of letting your bedroom be a location that depletes you throughout the numerous hours that you spend there, make it a place that revitalizes you instead. Pick up colors for the paint that will create the atmosphere and disposition you want.

Think About How You Feel

You’ll come across a wide variety of specialized perspectives on the colors that are most suited for your bedroom, but you shouldn’t let those perspectives obscure your genuine nature and requirements. In your bedroom, what kind of atmosphere do you hope to create for yourself? Do you wish to have a comfortable feeling? Relaxed? Energized? Clean? Fresh? The hue of the paint should be chosen to match how you want to feel as you wind down after a busy day and as you begin a fresh new day the following day.

A Calm & Unruffled Atmosphere

Think about using pastel hues in your bedroom if you want it to feel like a calm haven. You can make a calm and relaxing space for contemplation and relaxation by using a color story that consists of subdued pastels. Purple, one of the more daring hues, can be toned down to create a light pastel that gives off an inviting vibe.

Make the Most of Your Limited Space

It may seem counterintuitive to paint your bedroom walls black, but studies have shown that dark hues give the illusion of greater areas in smaller rooms. This effect is especially helpful in rooms that do not receive enough natural light. However, you shouldn’t lose yourself in the darkness. Create contrast by using light bedding and accessories with a dark wall.

Calming & Refreshing

When the temperature in the room rises above a certain threshold, the coziness and warmth that come from wrapping oneself in a mountain of blankets are diminished. In fact, specialists in sleep hygiene suggest that the ideal temperature for sleeping is between 60 and 67 degrees Fahrenheit in the room. You may assist prepare your mind for a restful night of sleep by selecting a color tone that is on the cooler side to go along with the temperature outside.

Energy & Equilibrium

The color green is one that can be used in a variety of settings, including the bedroom, where it may convey both a sense of activity and rest. Regardless of the aesthetic you’re going for, this is a stunning color that will help bring harmony to the rest of your space. It functions beautifully in both classic and contemporary design styles. Because it brings to mind images of the natural world, the color green is also calming, making it an excellent choice for bedtime.

Only Slightly More

If you have trouble deciding on a color or worry that you will be overpowered by a color used everywhere in your bedroom, but you still want to use it, think about how you can incorporate it in little doses. This is especially helpful if you have trouble committing to a color.

You can bring in an atmosphere you wish to experience by adding a red accent wall to the area. This wall won’t dominate the entire space. Include paneling on the lower half of your wall, which you can paint a different color than the top of the wall, which you should leave unpainted. Install a chair rail, and then paint the lower portion of the wall a shade that is brighter or darker than the top portion.

We at https://elmerpainting.com/ in the Spring Valley region take great pride in seeing our clients’ delighted reactions when they observe the dramatic difference that a new coat of paint can make in a space. Allow us to assist you in making the oasis that you have always imagined. Get in touch with us to receive a free estimate.

Read More
By Claudia Stephens

How To Clean Brushes & Rollers

September 2, 2022 | Home Improvement | No Comments

Did you know that soap and water won’t get all the paints out of brushes and rollers? It’s important to know how to wash paint brushes so that you don’t damage them and they last longer. By following these tips from your local Bergen Rockland Painters pros, you can learn how to clean different types of paint out of your brushes, rollers, and even hardened paint brushes.

How to Clean Paint Brushes Best

Keep your brushes damp so they stay soft and can be used for your next project. If you have to stop, wrap the brush in a damp paper towel to keep it from drying out. You should also clean it right away after each use because it’s much easier to clean up before the paint hardens in the bristles.

If you want to know how to wash paint brushes, follow these steps:

  1. Choose the right liquid to use. There is no one solvent that can get every kind of paint out of every kind of brush. Check the instructions that came with your paint to find out what to do. In general, paint thinner or mineral spirits work well to remove oil-based paints and lacquers. Shellacs react better to ammonia or alcohol that has been ruined. You can clean water-based paints with soap and warm water.
  1. Instead of putting paint down the sink, put it in a clean container. Can paint brushes be cleaned in the sink? We wouldn’t advise it. Cleaning your brushes in the sink can be a problem because you might clog your plumbing, be exposed to strong fumes, or pour the flammable liquid down the drain. Instead, put the solvent in a small, clean container. This lets you change out the solvent while cleaning the brush with as little waste as possible. You can seal this solvent and use it again later, or you can let it evaporate completely in a safe place, like your garage, before throwing it away.
  1. Move the brush around to get the paint out. Dip the paintbrush in the solvent and use a brushing motion to get the color out of the bristles. Don’t twist, press down directly on, or push the bristles back into the handle. Doing so could damage the brush.
  1. Clean, then clean some more. Wash the brush until there is no more solvent on it. It’s important to clean your brushes well because even a little bit of paint can cause them to harden.
  1. Dry. Once your brush is clean, gently press the water out with a paper towel. If there is still color on the paper towel, that means the brush needs to be cleaned more. Once the brush is clean, let it dry on a flat surface.

Cleaning Paint Rollers

Paint Brushes can be cleaned and used again, but should you clean or throw away paint rollers? Rollers can be used again and again, but they need to be cleaned properly so that the paint goes on smoothly.

To wash paint rollers, do the following:

  1. Roll in a solution for cleaning. Put the paint’s solvent in a clean roller pan, and then roll the paint roller in the solution to make the paint easier to spread. If you use a stronger chemical like ammonia, wear gloves to protect your hands and watch out for splashes that could hurt your skin or ruin your clothes.
  1. Scrub until solvent runs clear. After you’ve rolled out as much as you can, take the roller off the handle so you can continue to massage the paint out with gloved hands.
  1. To remove paint, use a putty knife. When paint gets between the roller and the handle, it dries and hardens into a crust. The putty knife can help you get the chunks out of the way before they get any harder. This will make sure that the next roll goes on smoothly.
  1. Hang on a string or dowel to dry. If you want the roller to dry evenly, don’t lay it on its side or let it stand on one end. Instead, put it on a string or dowel.
  1. Keep in a cabinet with no dust. If your roller is dirty, it will leave dust on your next painting job. Keep it in a clean, dry place until you need it.

Cleaning Hardened Paint Brushes

What happens if the brushes aren’t cleaned right away? It’s easy to put the brush down thinking you’ll clean it soon, only to find a few weeks later that it’s hard as a rock. Is it too late to save the crusty brush, or can it still be used?

Try these ways to clean dried-out paint brushes before you throw them away:

  • The solvent can be used to clean the brush. If you know what kind of paint is on the brush and has dried, you can match it with the right solvent. Pour some solvent into a clean container and swirl the brush in the liquid to soften the paint. After cleaning the brush, rinse it with water. Use a paper towel to dry the brush and reshape it before letting it dry on a flat surface.
  • You can clean your paintbrushes with vinegar. Bring vinegar to a simmer in a pan on the stove, turn off the heat, and put the hardened brush in the hot liquid for 20 minutes. After soaking, wash with soap and warm water to get any leftover paint off. Pat, it with a paper towel, and then lay it flat to dry.
  • Use fabric softener to make the bristles softer. Mix fabric softener with warm water and rub the bristles to get the paint out. After all the paint is off, rinse with clean water. Dry the brush flat so that water doesn’t run back into the handle and damage it.

Save Time & Effort by Hiring a Pro!

How well you can clean paint off brushes and rollers depends on the type of paint you are using and whether you are cleaning a brush or a roller. But is it even worth it to clean the brush and/or roller? Many people don’t have the right cleaning supplies at home, so they have to go to the store. The time it takes to clean your painting tools is also a factor. You’ll also need to find a safe place to keep everything. So, you may be looking at a set of hardened paint brushes and rollers and thinking, “There must be a better way.”

Instead of jumping through hoops to get everything done, let the professionals at your local https://newcityhousepainter.com/ give your home a fresh coat of paint and clean up afterward. We offer painting services for both the inside and outside of your home, so you can get the look you want without having to deal with the cleanup and mess. Call us at (973) 846-5552 or book an estimate online today to get started.

Read More
By Claudia Stephens

4 Problems With Micro Mesh Gutter Guards

August 22, 2022 | Home Improvement | No Comments

Everywhere, people who own their own homes are always looking for ways to avoid having to clean their gutters. One way that cleaning gutters is a dangerous and inconvenient DIY project is that you have to climb up on the roof and risk your safety on the ladder.

Companies that make gutter guards, especially those that sell micro mesh gutters, try to use this feeling to sell their products.

Most micro mesh gutters are made of stainless steel and have a netting called “micro mesh” that acts as a filter for your gutters. They are said to work with many different kinds of roofs and be easy to put up. The micro-mesh product is meant to work as a filter by letting water trickle through the mesh and drain out while catching leaves and other debris. This should help keep the gutters from getting clogged, which means you’ll spend less time cleaning the gutters and wondering if they’re clogged.

But micro mesh gutters are not as good as people say they are. Keep an eye out for the four biggest problems that micro mesh gutter guards can cause for your home.

Different Types of Gutter Guards

As you read this article, keep in mind that there are two types of gutter guards: flat and slanted.

  1. The flat style is placed right on top of the gutter.
  2. The slanted style tucks the shingles under at a right angle, making an angle that slopes down.

Both products have problems, some of which are unique and some of which are the same. This article will say at the beginning of each section which style we are talking about.

Problem 1: Gutter Guards Either Clog or Overcorrect

If you think gutter guards will keep you from ever having to clean your gutters again, you’re wrong. Even though gutter guards say they will keep your gutters clean and worry-free, they aren’t a sure thing.

Because the gutter guard is not set at an angle, the flat style naturally collects more debris. This makes it harder for the wind to blow and for the debris to fall off because of gravity.

The slant of the tucked style can make problems, like when the water doesn’t get into the gutter at all because it doesn’t go in the right direction. This overcorrection takes away from the main purpose of gutters, which is to move water away from your foundation and down the gutter.

Problem 2: Weight Problems With Micro Mesh

Keep in mind that “micro meshes” are very thin, as their name suggests. When the debris piles up too much for the gutter guard to handle, the system can collapse and cause damage to the gutter.

If the debris falls through the gutter guard, you haven’t solved the problem you were trying to solve.

In fact, you’ve made the problem worse because you’re now trying to clean your gutters through a micro mesh that is broken or has fallen apart.

Problem 3: Variables

Even though this isn’t necessarily a problem with the micro mesh gutter guard itself, it is something to think about if you’re thinking about putting them on your home. When you install a micro mesh gutter guard, there can be unintended results like:

  • A mouse or some other animal is chewing through your mesh.
  • When a bird landed on the micro mesh, it broke it.
  • A rock getting kicked or thrown on your roof by accident, damages the micro mesh.

We should be worried that people don’t think this product will last long. Remember that your gutter guards are outside and can get damaged by the weather.

Problem 4: Material Matters

We’ve already talked about how most micro mesh gutters are made of stainless steel. Even though that is true, it doesn’t mean that all gutter guards are made of stainless steel. Some of them can also be made of plastic.

Plastic gutter guards don’t fit gutters as well as ones made of stainless steel, and they can get in the way of asphalt, oils, and dirt that fall off the roof. This can cause the gutter guards to break down faster or make the gutters very dirty and sludgy.

Plastic gutter guards are not the way to go if you are set on getting them. Just because they last longer than plastic, stainless steel micro mesh gutters are better than plastic, but gutter guards should be avoided at all costs.

Last but not least, you should think about how much gutter guards cost and if they really save you money in the long run. Gutter Guards can cost up to $6,000 for the average home, and if you compare that to the average cost of a gutter cleaning service, it will take you about 17 years to get your money back. This is assuming you don’t have any big problems with the gutter guards, you don’t move, and you don’t change your mind in the next 17 years.

In the end, gutter guards aren’t worth all the trouble they cause. We don’t recommend using gutter guards because they are fragile, the environment can damage them, and they don’t give you much for your money. Having a professional service clean your gutters is safer, cheaper, and much more reliable than doing it yourself.

Call us at (919) 646-5009 if you’re unsure. At https://fuquayvarinagutters.com/, we are happy to give you a free quote for alternatives to micro mesh gutter guards that will keep your gutters clean. To find out more about gutter cleaning and gutter guards, you can also get a free quote online.

Read More
By Claudia Stephens

AC Compressors & What To Do If It Malfunctions

June 30, 2022 | Home Functionality, Home Improvement, My Blog | No Comments

Have you ever thought about how your air conditioner cools your home or business? An air conditioner takes heat out of the air inside your home, sends it outside, and then sends cool air back inside. Find out how the compressor, an essential part of your air conditioner, works and how to take care of it, so it keeps working. Need help with other HVAC services like heating repairs?

How Air Conditioners Work

An evaporator, condenser, and compressor comprise a central air conditioning system. The compressor connects the evaporator, which is inside the air conditioner, to the condenser, which is outside the house.

The evaporator and a fan are on the cold side of an air conditioner. The fan blows air over the chilled coils and into the room. The compressor, condenser, and another fan are on the hot side. This is where the hot air that comes from the compressed refrigerant is sent outside. There is an expansion valve between the two sets of coils. It controls how much of the compressed liquid refrigerant moves into the evaporator. 

When the refrigerant gets to the evaporator, the pressure drops. It then expands and changes back into a gas. The compressor is a big electric pump that puts pressure on the refrigerant gas as part of turning it back into a liquid. The main components of an air conditioner are the evaporator, compressor, condenser, and expansion valve. There are some other sensors, timers, and valves as well.

Even though this is a common way for an air conditioner to be set up, there are a few things you should know. All these parts are put together in a small metal box that fits into a window opening to make a window air conditioner. Hot air comes out of the back of the unit while a fan and condenser coils cool and circulate the air inside. 

Different things happen with bigger air conditioners: A home’s central air conditioner and heating system share the same thermostat, and the hot side of the unit, the compressor, and condenser, isn’t even in the house. It is outside in separate, all-weather housing. The outside condensing unit is often put on the roof of huge buildings, like hotels and hospitals.

Reasons for Compressor Failure

It can be a big problem when your air conditioner compressor problems starts to break down. Not only is the weather getting hotter every day, but you also need to find time to fix it. Worse still, you might not even know why the compressor broke in the first place! 

Knowing that, let us talk about some of the most common things that can go wrong with an AC compressor. By knowing what led to these problems, you can take steps to stop them from happening again.

Dirty Coils

Over time, dust and dirt will naturally build up on the condenser coil of an AC unit. This dirt can make the coil-less effective at transferring heat, which means the system has to use more energy to get to the temperature set by the thermostat.

When heat can’t get out, and the system works harder than usual, the compressor tends to get too hot and break. If your AC unit seems to be working hard, try cleaning the coils with special cleaning foam and see if that fixes the problem. Changing the air filter often keeps dust from building up on the evaporator coil and lets more airflow over the coil.

Damaged or Clogged Suction Lines

Problems with the suction lines are another thing that can cause a compressor to stop working all of a sudden. As refrigerant lines get older, they can get cracks and holes from the constant changes in temperature they experience over their lifetime.

If your lines are damaged, the compressor might not be able to move the refrigerant around the system as quickly, which will lower the cooling capacity of your system.

This puts more stress on the compressor motor because it must work harder to move enough refrigerant through the system. This usually leads to a breakdown at some point.

If your system is having trouble making cool air, you should have an HVAC technician check the suction lines to see if they are broken. They can change the lines and add more Freon if they find something.

Inadequate Lubrication

Like any other motor, the motor in your compressor needs to be oiled so that all its moving parts can work smoothly. If your compressor motor has to keep running without being oiled, it won’t be long before it wears out and must be replaced.

Most of the time, you can add lubricant to a compressor motor on your own, even if you have never worked with AC before. Find the oil lubricant entry point on your compressor and add some of the same lubricant recommended in the unit’s manual (be careful not to overfill and check the lubricant levels while filling). But if your compressor’s motor breaks before you can do this, you’ll need the help of a professional to install a new one safely.

Insufficient Refrigerant Charge

Freon, a refrigerant gas, is pumped through a series of refrigerant lines by the AC compressor. The lines that carry refrigerant are closed systems, and the amount of refrigerant should stay the same. But sometimes, a refrigerant line can leak, letting the refrigerant escape. 

When this happens, the system will overheat, making your air conditioner’s compressor stop working. If you think your system is leaking refrigerant, you should immediately call a professional to check it out. Leaks of refrigerants that aren’t fixed can hurt your AC unit and are hard to fix if you don’t have experience.

Electrical Malfunctions

No electrical system lasts forever; the same is true of an AC unit’s circuit board and wiring. Over time, acids and oxidation will build up and eat away at the circuit contacts, causing the power to go out.

In the end, this will stop power from getting to the air conditioner’s compressor, which will cause it to shut off quickly and without much warning. If you are not a trained electrical engineer, it will be hard for you to figure out what is wrong and fix it. On the other hand, an experienced HVAC technician can quickly and for a fair price replace the lousy wire or circuit board.

Contamination

If your house has central air conditioning, the compressor is usually in the outside unit or the condenser coils on the roof. Dust, dirt, leaves, bird droppings, and soot can get into your AC unit if left outside for a long time. If this junk gets into the compressor, it could cause it to stop working. To keep contaminants from getting in, you should clean the area around the outside unit and the unit itself. As part of regular maintenance, it should be done every couple of months.

How to Prevent the Malfunction

There are simple ways that you can do to stop the failure and degradation of your AC compressor, the easiest and most common are as listed:

Inspect for Leaks: Your system should be checked for leaks regularly. If there is a leakage, you should clean and deal with it right away.

Clean the Coils: Make sure the coils on your compressor are always clean. This will help ensure the air flows well and keep the car from getting too hot.

Check for Electrical Issues: Ensure enough power goes to your compressor. If you’re having trouble with your electricity, you should call a professional electrician for help.
Schedule for Maintenance: AC repairs and maintenance inspections are best left to the professionals, so if you require expert guidance and help, contact Oak Lawn HVAC Services via call at (708) 556-2336 or by visiting https://oaklawn-hvac.com/ to send a free quote.

Read More
By Claudia Stephens